Yamaha YZF-R1 & YZF-R6 AiM Solo 2 DL & SmartyCam 3 GP Motorcycle Plug & Play Lap Timer Track Day Kit

The Yamaha plug & play kit combined with the Solo 2 DL and SmartyCam 3 GP gives you the ultimate track day experience.

Key Features :

Predictive Lap Timer & Data Logger

This ultimate track day kit has been specifically designed for Yamaha bikes. The kit includes a plug & play interface cable and bracket for your bike. A Solo 2 DL to give you the most precise lap times and the incredibly robust SmartyCam 3 GP to record your races and provide all the technical layovers to help improve your performance. Also added is our 3 GP bullet camera clamp mount to enable you to position the bullet camera on your bike. Connecting the Solo 2 DL to your Yamaha ECU will give you all the engine performance information you need to help improve your driving performance.

SmartyCam 3 GP Features:

Plug & Play

The plug & play cable currently fits the following Yamaha bike models:

Yamaha YZF-R1 (YEC included) - 2004-2008	Yamaha YZF-R6 (YEC included) - 2004-2016

Powerful Combination

AiM Solo 2 DL is the most precise GPS lap timer there is with the ability to show you your lap time live as you drive. Receiving data from two satellite constellations from anywhere on the globe by using GPS and Glonass also giving you a significant improvement in data speed and positioning precision.

This all adds up to your startup time being reduced to a matter of seconds and lap times are accurate to a tolerance of two-hundredths of a second.

Easy Connection

The Yamaha ECU interface cable provides a plug & play solution for connecting the Solo 2 DL lap timmer to your bike. Please refer to the technical sheet on how to connect the ECU cable to your bike.

The sampled data you record depends on the actual ECU but typically includes RPM, engine load, throttle position (TPS), oil, air, water temperature, oil pressure, battery voltage, speed, gear and lambda value (air/fuel). The list of ECUs is forever growing and being updated.

With the added SmartyCam 3 GP camera you create an even more powerful system to help provide great videos that include all the technical information to help improve your performance.

The SmartyCam 3 GP has four connections, one that is completely dedicated to the bullet cam, one for the ECU-MIC, one for a GPS Module connection and the final connector is for outputting the video footage for streaming.

Please Note: For these models/years Aim recommends not to remove the stock dash. Doing so will disable some of the bike functions or safety controls.

Predictive Lap Timer

The GPS technology provides better reliability from the predictive lap timing function so you can see in real-time how your current lap compares to your best lap. The LEDs are also configurable to give a visual indication of whether you are quicker or slower. You can also build the layout of the display to show the data you want to see.

Solo 2 DL gives instant speed, timing splits live data and predictive lap times.

The Solo 2 DL has a sharp, high contrast display which helps drivers easily identify the data displayed on the screen. The Solo 2 DL also features a selection of 7 different backlight colours which can be selected to suit your requirements.

SmartyCam GP HD 2.2

The new SmartyCam 3 GP saves all your information to a supported micro-SD card for up to 2TB of data, this includes speed, RPM, lap number, gear shifts and many more features. With a built-in data logger running on an external power of 9-15 volts, the new SmartyCam 3 automatically powers on and off with your engine – and will start/stop recording for you. Analyse your data from a vast range of sources such as GPS track map, vehicle position and speed, and lap & split times. T format is at H.264 1920x1080 pixels, 60 FPS, and the display resolution of 2.4” 240x320 pixels gives your footage crisp condition. Our quality doesn’t falter, even under the pressure of extreme motorsport conditions such as poor weather, strong vibrations, continuous rain, and high/low temperatures as extreme as -10°C to + 50°C. Our camera is also waterproof (IP65) for extra protection.

SmartyCam 3 GP features a video output with SD interface. It allows you to send the video/audio directly to wherever you choose, for example your pit crew, at 30 or 60fps.

With the built-in data logger experience enhanced RPM, throttle, engaged gears, acceleration, temperatures, and pressures including a tri-axis accelerometer measuring 16G.

Automatic Start/Stop

When you're getting ready to race the last thing you want to be doing is fumbling around with your camera. The SmartyCam 3 GP has been designed with this in mind and switches on/off automatically and starts/stops recording in the same way.

The SmartyCam 3 GP can be switched on by the logger it is connected to. Switch-off is automatic too, you decide after what period of non-activity the camera will switch off.

Recording can also be started/stopped automatically or via the keyboard. With an automatic switch-on, the camera will start recording when the speed or RPM threshold is exceeded. In this case, you can simply decide how long after dropping below the selected threshold the video will automatically stop.

Solo 2 DL New Track Creation And Our Track Database

Solo 2 DL allows you to simply create a new temporary or permanent track layout whether it's a point to point run for rallying or a closed-loop track it can simply be added to the solo 2 and PC database.

Simply put, if there is no track already, the Solo 2 DL will create a new one for you.

With over 4000 tracks pre-loaded from around the world. As soon as it's switched on the Solo 2 DL identifies its position. Then once you start to drive it automatically recognises the start line coordinates of the track and will start sampling lap times every time you go past.

WiFi Communication With The PC

The Solo 2 DL has integrated Wi-Fi, so if you want to review your data in more depth simply transfer your data securely and quickly onto a laptop or computer up to 50m away without the need for connectors and cables. You can then import the data into the Race Studio 3 software.

Expand Your System

These are some of the items that can be added to our Solo 2 DL for incrementing the performance and data acquired.

Configure & Analyse with Race Studio 3

Configuration

With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.

Analysis

With Race Studio 3 you can also analyse all data recorded by Solo 2 DL and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances.

Yamaha YZF-R1 & YZF-R6 AiM Solo 2 DL & SmartyCam 3 GP Motorcycle Plug & Play Lap Timer Track Day Kit

• Display: Graphical
• Display Resolution : 238 x 99 pixels
• Display Pages: Up to 8 freely configurable
• Backlight: 7 configurable RGB colours
• Shift lights/alarm LEDs : 10 configurable RGB LEDs
• Integrated track database: Yes
• Inertial platform : Internal 3 axis +5G accelerometer + 3 axis gyro 
• Wi-Fi connection: Yes
• GPS: 10 Hz
• ECU connection: CAN, RS232 or K-Line to thousands of industry-leading ECUs
• External power: 12 V
• Connectors : 1 socket (binder) 712, 5 pins, 1 socket (binder) 712, 8 pins
• Memory: 4 GB
• Battery type: Rechargeable Lithium
• Pushbuttons: Metallic
• Dimensions : 98.0 x 73.7 x 30.2mm
• Weight: 249g, battery included
• Waterproof: IP67
• SmartyCam 3 GP
• Video format: H.264 1920x1080 pixels @ 60 FPS
• Display resolution: 2.4" 240 x 320 pixels
• Lens: Low distortion camera lens
• CMOS sensor: Global Shutter
• Field of view: 67°, 84° or 120°
• Internal battery: Rechargeable lithium battery
• Video Out: 3G-SDI
• External power: 9-15 Volt
• Supports SD card: Up to 2 TB
• Accelerometer: Three-axial ± 16G
• Connectors: 1 Deutsch 22 pin + 1 SMA SDI Video out + 2 SMA bullet connection + 1 USB-C
• Usage temperatures: -10°C/+50°C
• Auto Power ON: Yes
• Auto Power OFF: Yes
• Auto Start/Stop Recording: Yes
• Body: Anodised Aluminium
• Dimensions: Main Body - 154.4x109.6 x 42mm, Bullet Camera - 24diam x 48.2mm
• Bullet Cable Length: From 500mm to 4,000 mm (6 lengths available)
• Weight: Main Body - 800g, Bullet Camera - 45g
• Waterproof: IP65

Please refer to the Technical sheets in the Downloads Tab for all other diagrams for Solo2 DL and SmartyCam 3 GP.

Below is the pinout drawing for the Yamaha plug & Play connection cable.

Yamaha YZF-R1 & YZF-R6 AiM Solo 2 DL & SmartyCam 3 GP Motorcycle Plug & Play Lap Timer Track Day Kit

• Solo 2 DL
• Power cable with AC adapter
• SmartyCam 3 GP - Bullet Cam
• External CAN cable 2m
• External power cable
• Battery charger with AC power adaptor
• SmartyCam 3 GP camera clamp mount
• Yamaha Plug & Play connection cable
• Bracket
• 2 spacers
• 2 self-locking nuts M6
• 2 washers M6
• 4 washers M6
• 2 self-locking nuts M4
• 2 washers M4
• 2 Allen screws with flat head M4 x 10mm
• 2 Allen screws with rounded head M6 x 60mm