Przejdź do informacji o produkcie
1 z 1

AiM Hall Effect Wheel Speed Sensor

SKU: S-S-ABS

Normalna cena
£105.00
Normalna cena
Cena sprzedaży
£105.00

Wysyłka za pomocą Shopify Planet neutralna pod względem emisji dwutlenku węgla
Wysyłka neutralna pod względem emisji dwutlenku węgla we wszystkich zamówieniach

AiM M12 Hall Speed Pickup 719 Binder

The AiM Hall Effect Sensor is a non-contact device that needs a metallic trigger to pass in front of it. 

Key Features :

Hall effect wheel speed sensor 4 pin 719 binder connector


AiM M12 Hall Speed Pickup 719 Binder

The Hall Effect Sensor is a non-contact device that needs a metallic trigger to pass in front of it. Again, a bracket will usually need to be fabricated to mount the sensor in a suitable position. Would you please ensure that the distance between the sensor and trigger is in a 0.5 – 2.0 mm (0.007-0.07 inches) range? Cable length approximately 2.0m. A higher-quality Honeywell ABS hall effect sensor is also available.

 The 719 connection will suit the MXL2, all MX Series including Strada. Use with 719-719 patch lead.


Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

AiM Hall Effect Wheel Speed Sensor 

  • Power supply voltage: 4.5-24 VDC
  • Current consumption: 10 mA (typical) 20 mA (max)
  • Output signal type: 0-5V
  • Max current output: 20mA
  • Max operating freqency: 100kHz
  • Sensibility distance: 0.5 to 2mm (from 0.007 to 0.07 inches)
  • Recommended distance: 1mm
  • Operating temperature range: from - 40 to 150°C (from 104 to 302F)
  • Cable length: 80mm

 


AiM Hall Effect Wheel Speed Sensor 

  • 1 x Hall Effect Speed Sensor
FAQ Centre

Description

AiM M12 Hall Speed Pickup 719 Binder

The AiM Hall Effect Sensor is a non-contact device that needs a metallic trigger to pass in front of it. 

Key Features :

Hall effect wheel speed sensor 4 pin 719 binder connector



AiM M12 Hall Speed Pickup 719 Binder

The Hall Effect Sensor is a non-contact device that needs a metallic trigger to pass in front of it. Again, a bracket will usually need to be fabricated to mount the sensor in a suitable position. Would you please ensure that the distance between the sensor and trigger is in a 0.5 – 2.0 mm (0.007-0.07 inches) range? Cable length approximately 2.0m. A higher-quality Honeywell ABS hall effect sensor is also available.

 The 719 connection will suit the MXL2, all MX Series including Strada. Use with 719-719 patch lead.


Visit Aim Academy Visit Aim Tech Support Download Race Studio Software

Technical 

AiM Hall Effect Wheel Speed Sensor 

  • Power supply voltage: 4.5-24 VDC
  • Current consumption: 10 mA (typical) 20 mA (max)
  • Output signal type: 0-5V
  • Max current output: 20mA
  • Max operating freqency: 100kHz
  • Sensibility distance: 0.5 to 2mm (from 0.007 to 0.07 inches)
  • Recommended distance: 1mm
  • Operating temperature range: from - 40 to 150°C (from 104 to 302F)
  • Cable length: 80mm

 


What's in The Box

AiM Hall Effect Wheel Speed Sensor 

  • 1 x Hall Effect Speed Sensor

Downloads

FAQ Centre

FAQ Centre